Are you searching for bathroom renovations? You cannot miss the ceramic tile shower decorations! Tiles are one of the primary décor materials in the indoor and outdoor wall decorations, available in a variance of colours, patterns, textures, and have the aspects of stain-resistance, wear-resistance, and maintenance, assisting you in remodeling your shower walls with a beautiful look. This article guides on how to tile a shower wall and covers some quick tips for a more elegant bathroom. It will also help you to renovate your shower precisely the way you want it to be!
STEP 1: Checking
Start with observing the facade upon which you intend to installing wall tile in a shower. A tilted or crooked wall surface that is uneven or angled can lead to broken tiles and may fail to be plastered.
Use water-resistant backer boards instead of drywall that must be used under tiles of shower walls. Make sure the surface is clean, balanced, and even. Surfaces should be leveled and flat, and as even as possible without bumps or irregularities.
STEP 2: Measuring
First, build and mark a top-line when you start tiling a wall. Most walls are angled, and very few are upright/sheer. You will want to use a level to mark the top line for that. Measure the height so that you can calculate how you need to cut the last row of tiles to fit it comfortably. Preplan how you want to layout the tiles along the walls before you begin tiling.
In older homes, you might find that the walls aren’t symmetrically shaped, which makes the job more difficult. Account one of the walls as the baseline, so that the tiling looks symmetric and even after it is done.
After identifying the center and the baseline, draw two perpendicular lines along the walls and mark them with chalk. These lines will divide the wall into proportionate quadrants. You will have to start working at the center point in each of the four sections of the wall and then move outwards. This is the answer to the question of how to install shower wall tile and enhance its beauty.
STEP 3: Laying
After determining the top line level for the shower wall tile installation, arrange the tiles in an imaginary grid to know how they will show. Lay the tiles when dry and before mixing the adhesive to get an idea of the outcome.
You must keep the space between the bathroom shower wall tile uniform. So use spacers if you can to make sure all the tiles are equidistant (or if your tiles don’t come on mesh sheets). Also remember, the larger the size of the tile you are using, the larger space you need to leave between them. If you don’t leave enough room in between tiles, the grout won’t stick to the surfaces well enough later, leading to leaks and water damage.
During the actual tiling procedure, start working at the outside edge of one of the quadrants, one row at a time. Fill in the tiles as you keep going. Then move up or down and accordingly. Dry lay the tiles before adhering to make sure to leave enough surface area for proper spacing.
STEP 4: Cutting
The initial stage in cutting large tiles for shower walls is measuring the tile you want to cut and then marking the measurements on the glassy/shiny surface of the tile with a marker. Carefully position the tile on the tile cutter and then adjust the cutting line of the cutter with the axis markings on which the tile is to be cut. Move the cutter along the tile surface by using the lever of the cutting wheel by applying a strong yet even pressure. Finally, break the tile along with the cut.
STEP 5: Adhering
Tiles tend to start setting in as soon as it comes in contact with a moist surface. You will want to use a waterproof adherent for this purpose. Use either a premixed adhesive or a thin-set variety mortar.
Check the product details to determine how quickly the mix will dry and spread the adhesive accordingly. Then, start setting in the adhesive evenly with a trowel and place one tile at a time with a little bend across the edges to spread the adhesive along the surface of the wall. Try to begin near the center of the surface of the shower wall and then move along outwards to the perimeters.
STEP 6: Grouting
Grout is usually sold in stores as a powder and then mixed with a recommended supplement. Follow instructions on the container for easier guidance. Put on some gloves and spread the grout uniformly, forcing it into the gaps by pressurizing it with a stick or blunt tool.
To enhance your colour scheme, add a colour dye or pigment to the grout.
STEP 7: Clean and seal the deal
Be sure that you properly clean the slag and debris off the surface of the tiles before it dries off. This stage will need many sub-steps through a duration of an hour or maybe more. It’s a crucial step when you are working with tiles that have an absorptive or assorted surface. Dried out grout or plaster can be impossible to remove from an uneven depression on the tiled wall surfaces.
Finally, apply some sealer and you are done tiling your bathroom walls precisely the way you wanted them!